Az árak tartalmazzák az ÁFA -t. Szállítási költségek
Szállítási idő kb. 1-3 munkanap
The F-ONE MIRAGE kitefoil wings range is made of 3 sizes to suit all freeride and freestyle needs.
Extremely easy to control, these wings offer smooth take-offs, effortless turns and fantastic stability.
- 3 sizes to suit all freeride and freestyle needs
- Smooth take-offs, effortless turns and fantastic stability
- Plenty of control and total maneuverability
|Area||650 cm²||800 cm²||1000 cm²|
|Weight||0.88 kg||0.87 kg||0.87 kg|
Flatter in the middle with tips accurately arched down the three wings share a similar arch profile which provides plenty of control and total maneuverability. Their aspect ratio is compact, providing more freedom in all maneuvers. They also have a refined twist distribution which not only helps with the glide but also make the power of the wing more manageable when carving lines.
To maintain optimal control, we build these wings in carbon pre-preg. And the larger sizes also have a foam core to keep them light. All sizes share the same metal insert with the FCD connector fully machined via CNC for a strong and perfect assembly.
The MIRAGE wings fit all 2018 F-ONE foils, and also previous versions. All perfectly balanced, the MIRAGE wings are very accessible to any skill level with the larger sizes and will impress the most advanced riders with the smaller sizes.
They are perfect for anyone who likes to cruise and carve some lines on their foil.
650 cm2 - the smallest size also has the thinnest profile to provide a really nice glide together with some endless carving possibilities. The best speed to carving combo.
800 cm2 - the most versatile size of the range offers good lift, good glide and super smooth manoeuvrability.
1 000 cm2 - the largest model offers absolute speed control, early lift and is great at low speed transitions. Can also be used on Surf or SUP foils when riding regular waves
Versatile and progressive, the C300 stabilizer can be combined with any front wings and fits a very large range of practices. Equipped with generous winglets, the stabilizer blade offers fantastic control with enough surface area to provide full confidence in all situations.
Built in Carbon Composite and designed to be securely mounted on F-ONE fuselages, its profile and angle of incidence were tuned to achieve a very intuitive balance which will help you get your foiling maneuvers in more easily.
The Mast Top Parts are the connecting parts between the aluminium mast and the foil board. They fit directly onto the aluminium mast and are available for various standards.
The F-ONE aluminium mast can be used for all disciplines, kite, surf, sup and windsurf. The profile is extruded with precision from 6063 aluminium block. Theshape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular. The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another. A number of parts are available for board connection(Plate, KF, Deep KF, Tuttle).
Aluminium parts are integral to our foils. Except for the mast which is extruded, all parts are CNC machined with a precision down to 0,2mm.
Machining blocks of aluminium 6061 guarantees the maximum accuracy and preserves the mechanical properties of this higher grade of aluminium. All parts are fully anodized and stainless steel inserts are fitted with isolating gel when fastening is required.
The TITAN connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions. Its format is compact which is hydrodynamically friendly and very easy to use, assemble and disassemble.
The F-ONE Carbon masts provide amazing speed potential with top precision in all conditions. With their high-performance profile evolving from 1.2 cm thick at the bottom to 1.35 cm at the top, these masts deliver an impressive feeling of glide and top of the range performance. The intricate profile and chord length prevent turbulence and make them very secure and stable at speed. Their elaborate carbon PRE-PREG one-shot molding construction makes sure these masts meet the required demand on torsion and bending stiffness to keep the control of the foil at any moment and especially when pushing hard.
Equipped with a built-in TITAN mast foot, the carbon masts are compatible with all TITAN fuselage our Wings. Available in 65cm length with tuttle head and lighter layup or in 85cm, 95cm and 105 with stiffer layup including some high modulus carbon and a deep tuttle head.
Section thickness: 12mm (bottom) / 13.5mm (top)
Section chord: 110mm (bottom) / 135mm (top)
We have patented the FCD assembly concept because this is a critical aspect of the kitefoil. It drives the reliability and ease of use for assembling and taking the foil apart for transportation, as much as the repeatability of the trim between the front and rear wings.
The main benefit of the system lies in the main screw that maintains the front wing with the rest of the foil. This screw is placed longitudinally and is therefore only stressed in tension instead of shear or bending. The whole foil can be tightened up with everything working in a sound mechanical way.
To gain some precision, robustness and packed-up volume, the screw is combined with a squared, conical assembling system, which has been proven as the best mechanical setup to lock any motion or degree of freedom between the parts, while also contributing greatly to tensional resistance.
With Pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer; this guarantees a perfect ratio between epoxy and carbon, and represents the highest quality process. The material is stored in cooled rooms and catalyzes at 120° C in a mold.
The Pre-preg fibers must travel in refrigerated trucks and be stored frozen. The refined ratio between carbon fiber and epoxy resin provides the lightest weight with the best mechanical properties of carbon fiber.
- SCREWS AND BOLTS:
Tools Torx T30 & Wrench #10
T-Nuts (A4) x4
M6-16mm tapered head screws (A4 - T30 torx) x2
M6-25mm tapered head screws (A4 - T30 torx) x4
M6-50mm cylindrical head screws (A4 - T30 torx) x2
Main Rod (210)
Washer 12mm x4
- EVA COVER